Is System Center 2012 R2 - Configuration Analyzer 1.0 for VMM useful and...
I am trying to determine the cause of errors deploying new VMs to a host. Some discussions suggested that the VMMCA might be able to shed light on the cause of the problem.In trying to use VMMCA, I am...
View ArticleTest PRO fails at 75%
I recently installed SCOM update UR7 update patch. I went into SCVMM to refresh the SCOM integration. The connection status held an error but as soon as I clicked the refresh button, it changed to OK....
View ArticleWhen you remove a virtual hard disk from a virtual machine in System Center...
Hi Experts !!!We are on W2012R2 Hyper-V with SCVMM2012R2. "When you remove a virtual hard disk from a virtual machine in System Center Virtual Machine Manager 2012 R2, the .vhd file on the Hyper-V...
View ArticleSCVMM Error 13206 Failed to Install VM components
I'm running a MS Windows Failover Cluster with 4 nodes and one SCVMM host. All servers have the latest update of Windows Server 2012 R2. What I'm trying to do is create some virtual machines on the...
View ArticleThe operation 'Get Stats' failed on port
Hi,I'm getting a error in the server manager on my Hyper-V 2012 R2 server: Eventid 75 (system log) source: Microsoft-Windows-Hyper-V-VmSwitch, The operation 'Get Stats' failed on port <number>...
View ArticleVMM Client Can't Connect 2012 R2
I have tried to install Update Rollup 7 on the SCVMM server, 3066340 worked, 3078314 & 3078315 did not. I get an error the program being upgraded is missing.My issue is, VMM works fine on SCVMM...
View Article"Inaccessible Boot Device" When added a fully patched Hyper-V host to VMM.
I have a patched Hyper-V (latest patches until 18 mars 2015). It works fine to boot and play around with. But when I add it into Virtual Machine Manager (UR5 with al l the latest patches) I get a...
View ArticleSCVMM 2012 SP1 with Windows 2012 R2 Hypervisor check point issues
hi i have Windows 2012 R2 Hypervisor with SCVMM 2012 SP1(RTM) on Windows 2012 R2 Server, when i try to create checkpoint for VM from SCVMM, backend it will create checkpoint, but SCVMM job says it's...
View ArticleSCVMM 2012 (not R2) High Bandwidth Traffic
we've windows server 2008R2 installed with scvmm 2012 standard (not R2). From monitoring tool that we have, SCVMM server shows very high network traffic >5MB and this continues to rise. The Traffic...
View ArticleBare metal deployment blade with iSCSI HBA
We are attempting to do a bare metal deploy via VMM to blade servers that are configured to boot via iSCSI HBA. Is this supported? The error we are getting isError (21114) Unable to configure BCD...
View ArticleSCVMM Bare Metal Deployment - Unable to configure BCD record on physical...
Hi All,I am stumped on this one, I am trying to perform a bare metal deployment of a Hyper-V server using SCVMM.The server successfully PXE boots, performs deep discovery, downloads the VHD file and...
View ArticleNVGRE - Policy refresh failed with error
We have lot of NVGRE gateway clusters in our environment - currently 15 with 50 networks on each.In VMM job "Update the Hyper-V Network Virtualization Policy" always ends with error like this:Warning...
View ArticleCompliance scan fails
I have SCVMM 2012 R2 running on Windows Server 2012 R2; the host servers are 2012 R2 as well. I have established a baseline and done compliance scans without issue in the past. However, I have now...
View ArticleClik here to view.
VM when deployed in scvmm using SMB 3.0, do we have to make it highly...
Using SCVMM 2012 R2, Hyper-V 2012 R2 Cluster, SMB 3.0 storage.When deployed using cloud, the VM is created in SMB share but when i see the properties of the VM, it is not configured to be Highly...
View ArticleClik here to view.
Pieces of SCVMM Configuration Lost/Missing in GUI?
I setup SCVMM about 2 months ago. I logged into to create a VM using one of our templates and I noticed we are missing huge pieces of our configuration. An entire host group for our Training network...
View ArticleAdd Machine Tier To Existing Service
I'm wondering if there's a way to add another machine tier to an existing service by modifying the service template that was used to create the service. Basically, I created a single machine service...
View Articlewant to test scvmm vlan based networking but dont have real devices ? can i...
Hi ,I have scvmm 2012 r2 lab environment , now i want to test Vlan based networks , but i do not have real switches /routers for this testing .can i achieve same thing with virtual routers and switches...
View ArticleRevert from WinRM 3.0 to WinRM 2.0
Hello,I am trying to install System Center Virtual Machine Manager 2012 in a Hyper-V 2012 R2 environment, and when I run the analyzer, I get this alert:Category: Prerequisite Source: hyper-1 Issue: The...
View ArticleSCVMM 2012 High Bandwidth Utilization
I've got a SCVMM 2012 (no R2 no SP1) running on Windows Server 2008 R2, and has been running for about 17 months. Last month i've been contacted by our administrator that the traffic is so high. When...
View ArticleSCVMM appearance
Does anyone know how to change the appearance of the SCVMM console? For some reason it is showing up in a light grey theme, which makes it hard to read the text. How do I switch it back to the dark...
View Article